Consenso all'uso dei cookies

SITO1 -- SITO2 -- Forum2 -- CercaGlobale -- Informativa su Cookie e Privacy

Questo Forum1 è in sola lettura -- Usa il Forum2


Valutazione discussione:
  • 0 voto(i) - 0 media
  • 1
  • 2
  • 3
  • 4
  • 5
configurazione rete SAMBA con diversi tipi di macchine
#1
Un saluto a tutti, ho un problema stranissimo con Samba io da sempre ho una rete domestica costituita da:

1) Un pc fisso con xubuntu(192.168.0.2)
2) Un netbook con xubuntu(192.168.0.5)
3) Un access Point per ripetere il segnale wi-fi (192.168.0.234)
4) Un BUFFALO linkstation 4 terabyte (192.168.0.6)
5) Un lettore multimediale EMTEC sempre collegato in rete (192.168.0.41)

Fino alla versione 12.04 di xubuntu non avevo problemi, poi SAMBA ha cominciato a fare le prime bizze.

In pratica, sul PC FISSO io vado su thunar, clicco su "esplora la rete", mi fa vedere "rete windows" e poi ci clicco e mi fa vedere "WORKGROUP", e cliccando su WORKGROUP non appare niente, OPPURE MI CHIEDE UNA FANTOMATICA PASSWORD, nonostante abbia indicato sul pannello delle impostazioni di xfce, alla voce samba, di aver condiviso in modalità lettura/scrittura due cartelle.

LO stesso sul netbook.

Tutti i contenuti in rete vengono regolarmente visualizzati solo se scrivo su thunar smb://IP_Della_macchina/

Inutile dire che l'emtec è inutilizzabile, lui vede solo il contenuto di workgroup.

MI potete aiutare in modo che TUTTE LE MACCHINE vengano visualizzate SOTTO LA cartella WORKGROUP, come una volta?


Grazie!!![img]images/smilies/arrendo.gif[/img]
Cita messaggio
#2
qualcuno mi aiuta? grazie!
 
Cita messaggio
#3
ho chiesto intervento, sicuramente qualcuno ti saprà rispondere.
Cita messaggio
#4
http://www.html.it/pag/18672/configurare-samba/
 
Cita messaggio
#5
Probabilmente la password te la chiede perché nel file di configurazione di samba la direttiva security è impostata su user.
Oltre alla guida che ti è già stata linkata, darei un occhiata anche qui oltre alla documentazione ufficiale (in inglese).
Ricontrolla anche gli attributi browseable e available

 

 
Windows XP Professional 32 bit - Pentium IV 2,66 GHz - 1 GB RAM;
Xubuntu 12.04 32 bit - Pentium IV 2,40 GHz - 512 MB RAM
Cita messaggio
#6
(26-08-2014, 17:27 )'snot' Ha scritto: Probabilmente la password te la chiede perché nel file di configurazione di samba la direttiva security è impostata su user.
Oltre alla guida che ti è già stata linkata, darei un occhiata anche qui oltre alla documentazione ufficiale (in inglese).
Ricontrolla anche gli attributi browseable e available

 

 


 

Grazie mille Snot, finalmente c'è un anima pia che mi aiuta.
Dunque, io ho seguito le tue guide, e mi sembra che il mio file /etc/samba/smb.conf sia a posto:


Codice:
#
# Sample configuration file for the Samba suite for Debian GNU/Linux.
#
#
# This is the main Samba configuration file. You should read the
# smb.conf(5) manual page in order to understand the options listed
# here. Samba has a huge number of configurable options most of which
# are not shown in this example
#
# Some options that are often worth tuning have been included as
# commented-out examples in this file.
# - When such options are commented with ";", the proposed setting
# differs from the default Samba behaviour
# - When commented with "#", the proposed setting is the default
# behaviour of Samba but the option is considered important
# enough to be mentioned here
#
# NOTE: Whenever you modify this file you should run the command
# "testparm" to check that you have not made any basic syntactic
# errors.

#======================= Global Settings =======================

[global]

## Browsing/Identification ###

# Change this to the workgroup/NT-domain name your Samba server will part of
workgroup = WORKGROUP

# server string is the equivalent of the NT Description field
server string = %h server (Samba, Ubuntu)

# Windows Internet Name Serving Support Section:
# WINS Support - Tells the NMBD component of Samba to enable its WINS Server
# wins support = yes


# WINS Server - Tells the NMBD components of Samba to be a WINS Client
# Note: Samba can be either a WINS Server, or a WINS Client, but NOT both
; wins server = w.x.y.z

# This will prevent nmbd to search for NetBIOS names through DNS.
dns proxy = no

#### Networking ####

# The specific set of interfaces / networks to bind to
# This can be either the interface name or an IP address/netmask;
# interface names are normally preferred
; interfaces = 127.0.0.0/8 eth0

# Only bind to the named interfaces and/or networks; you must use the
# 'interfaces' option above to use this.
# It is recommended that you enable this feature if your Samba machine is
# not protected by a firewall or is a firewall itself. However, this
# option cannot handle dynamic or non-broadcast interfaces correctly.
; bind interfaces only = yes



#### Debugging/Accounting ####

# This tells Samba to use a separate log file for each machine
# that connects
log file = /var/log/samba/log.%m

# Cap the size of the individual log files (in KiB).
max log size = 1000

# If you want Samba to only log through syslog then set the following
# parameter to 'yes'.
# syslog only = no

# We want Samba to log a minimum amount of information to syslog. Everything
# should go to /var/log/samba/log.{smbd,nmbd} instead. If you want to log
# through syslog you should set the following parameter to something higher.
syslog = 0

# Do something sensible when Samba crashes: mail the admin a backtrace
panic action = /usr/share/samba/panic-action %d


####### Authentication #######

# Server role. Defines in which mode Samba will operate. Possible
# values are "standalone server", "member server", "classic primary
# domain controller", "classic backup domain controller", "active
# directory domain controller".
#
# Most people will want "standalone sever" or "member server".
# Running as "active directory domain controller" will require first
# running "samba-tool domain provision" to wipe databases and create a
# new domain.
server role = standalone server

# If you are using encrypted passwords, Samba will need to know what
# password database type you are using.
; passdb backend = tdbsam

obey pam restrictions = yes

# This boolean parameter controls whether Samba attempts to sync the Unix
# password with the SMB password when the encrypted SMB password in the
# passdb is changed.
unix password sync = yes

# For Unix password sync to work on a Debian GNU/Linux system, the following
# parameters must be set (thanks to Ian Kahan <<kahan@informatik.tu-muenchen.de> for
# sending the correct chat script for the passwd program in Debian Sarge).
passwd program = /usr/bin/passwd %u
passwd chat = *Enter\snew\s*\spassword:* %n\n *Retype\snew\s*\spassword:* %n\n *password\supdated\ssuccessfully* .

# This boolean controls whether PAM will be used for password changes
# when requested by an SMB client instead of the program listed in
# 'passwd program'. The default is 'no'.
pam password change = yes

# This option controls how unsuccessful authentication attempts are mapped
# to anonymous connections
map to guest = bad user

########## Domains ###########

#
# The following settings only takes effect if 'server role = primary
# classic domain controller', 'server role = backup domain controller'
# or 'domain logons' is set
#

# It specifies the location of the user's
# profile directory from the client point of view) The following
# required a [profiles] share to be setup on the samba server (see
# below)
; logon path = \\%N\profiles\%U
# Another common choice is storing the profile in the user's home directory
# (this is Samba's default)
# logon path = \\%N\%U\profile

# The following setting only takes effect if 'domain logons' is set
# It specifies the location of a user's home directory (from the client
# point of view)
; logon drive = H:
# logon home = \\%N\%U

# The following setting only takes effect if 'domain logons' is set
# It specifies the script to run during logon. The script must be stored
# in the [netlogon] share
# NOTE: Must be store in 'DOS' file format convention
; logon script = logon.cmd

# This allows Unix users to be created on the domain controller via the SAMR
# RPC pipe. The example command creates a user account with a disabled Unix
# password; please adapt to your needs
; add user script = /usr/sbin/adduser --quiet --disabled-password --gecos "" %u

# This allows machine accounts to be created on the domain controller via the
# SAMR RPC pipe.
# The following assumes a "machines" group exists on the system
; add machine script = /usr/sbin/useradd -g machines -c "%u machine account" -d /var/lib/samba -s /bin/false %u

# This allows Unix groups to be created on the domain controller via the SAMR
# RPC pipe.
; add group script = /usr/sbin/addgroup --force-badname %g

############ Misc ############

# Using the following line enables you to customise your configuration
# on a per machine basis. The %m gets replaced with the netbios name
# of the machine that is connecting
; include = /home/samba/etc/smb.conf.%m

# Some defaults for winbind (make sure you're not using the ranges
# for something else.)
; idmap uid = 10000-20000
; idmap gid = 10000-20000
; template shell = /bin/bash

# Setup usershare options to enable non-root users to share folders
# with the net usershare command.

# Maximum number of usershare. 0 (default) means that usershare is disabled.
; usershare max shares = 100

# Allow users who've been granted usershare privileges to create
# public shares, not just authenticated ones
usershare allow guests = yes
security = user
; encrypt passwords = yes
; guest ok = yes
; guest account = nobody
; guest ok = no

#======================= Share Definitions =======================

# Un-comment the following (and tweak the other settings below to suit)
# to enable the default home directory shares. This will share each
# user's home directory as \\server\username
;[homes]
; comment = Home Directories
; browseable = no

# By default, the home directories are exported read-only. Change the
# next parameter to 'no' if you want to be able to write to them.
; read only = no

# File creation mask is set to 0700 for security reasons. If you want to
# create files with group=rw permissions, set next parameter to 0775.
; create mask = 0700

# Directory creation mask is set to 0700 for security reasons. If you want to
# create dirs. with group=rw permissions, set next parameter to 0775.
; directory mask = 0700

# By default, \\server\username shares can be connected to by anyone
# with access to the samba server.
# Un-comment the following parameter to make sure that only "username"
# can connect to \\server\username
# This might need tweaking when using external authentication schemes
; valid users = %S

# Un-comment the following and create the netlogon directory for Domain Logons
# (you need to configure Samba to act as a domain controller too.)
;[netlogon]
; comment = Network Logon Service
; path = /home/samba/netlogon
; guest ok = yes
; read only = yes

# Un-comment the following and create the profiles directory to store
# users profiles (see the "logon path" option above)
# (you need to configure Samba to act as a domain controller too.)
# The path below should be writable by all users so that their
# profile directory may be created the first time they log on
;[profiles]
; comment = Users profiles
; path = /home/samba/profiles
; guest ok = no
; browseable = no
; create mask = 0600
; directory mask = 0700

; wins support = no
; wins support = no
[printers]
comment = All Printers
browseable = no
path = /var/spool/samba
printable = yes
; guest ok = no
; read only = yes
create mask = 0700

# Windows clients look for this share name as a source of downloadable
# printer drivers
[print$]
comment = Printer Drivers
path = /var/lib/samba/printers
; browseable = yes
; read only = yes
; guest ok = no
# Uncomment to allow remote administration of Windows print drivers.
# You may need to replace 'lpadmin' with the name of the group your
# admin users are members of.
# Please note that you also need to set appropriate Unix permissions
# to the drivers directory for these users to have write rights in it
; write list = root, @lpadmin

[davide]
path = /home/davide

; browseable = yes
guest ok = yes
; available = yes



available = no
browsable = no
public = no
writable = yes
[Scrivania]
path = /home/davide/Scrivania

; browseable = yes
guest ok = yes
available = yes
browsable = yes
public = yes
writable = yes

**Piccolo aggiornamento: non mi chiede più la password per entrare in WORKGROUP. Mistero.**

Ora, io ad esempio ho uno dei pc non funzionanti che si chiama PATROCLO-DESKTOP. Quando la rete funzionava bene, aprivo sul gestore file la cartella WORKGROUP, e dentro risultavano tutti i nomi dei dispositivi collegati (LINKSTATION, PATROCLO-DESKTOP, EMTEC, ecc). Questo per dire che ora i nomi delle macchine vengono del tutto ignorati, le cartelle e i files condivisi vengono visti solo digitando sulla barra degli indirizzi smb://192.168.0.xxx..... e NON dentro WORKGROUP. L'UNICA COSA che si vede su WORKGROUP e' il mio BUFFALO LINKSTATION, che è configurabile da un interfaccia web.


Insomma, non mi ci raccapezzo. forse tu/voi riuscirete a vedere cosa c'è che non va in questo smb.conf che ho postato, se avete bisogno che posti qualcos'altro lo farò subito, intanto vi ringrazio tantissimo! Smile



 
Cita messaggio
#7
Nessuno può aiutarmi?
 
Cita messaggio


Vai al forum:


Utenti che stanno guardando questa discussione: 1 Ospite(i)