SITO1 -- SITO2 -- Forum2 -- CercaGlobale -- Informativa su Cookie e Privacy

Questo Forum1 è in sola lettura -- Usa il Forum2


Valutazione discussione:
  • 0 voto(i) - 0 media
  • 1
  • 2
  • 3
  • 4
  • 5
[RISOLTO] blocco del sistema operativo
#51
il comando non è:
Citazione:
Codice:
sudo smartctl -a /dev/sda1 sudo
ma:


Codice:
sudo smartctl -a /dev/sda1

 
Cita messaggio
#52
Dal grub iniziale scegli -> modalità di ripristino -> abilita rete - poi -> controlla tutti i file system - alla fine -> Ripristina l'avvio normale. L'aggiornamento è stato fatto???
 
Cita messaggio
#53
scusami,ma con i code e il block quote ecc faccio sempre un pò di confusione
Cita messaggio
#54
non è cosi difficile, scrivi da tastiera: code inserito nelle parentesi quadre[font]. ora incolla il tuo post ed al termine sempre tra parentesi quadre /code
prova a modificare il tuo lungoooo messaggio di prima[/font]
Cita messaggio
#55
dal terminale ho digitato:

sudo apt-get update

poi

sudo apt-get upgrade

ma non l'ho fatto dal live, va bene lo stesso.

Poi, non mi ricordo come si fa per andare nel Grub (adopero Ubuntu 13.10)
 
Cita messaggio
#56
Codice:
Citazione:ubuntu@ubuntu:~$ sudo apt-get smartmontools
E: Invalid operation smartmontools
ubuntu@ubuntu:~$ sudo apt-get install smartmontools
Reading package lists... Done
Building dependency tree       
Reading state information... Done
The following extra packages will be installed:
  bsd-mailx postfix
Suggested packages:
  procmail postfix-mysql postfix-pgsql postfix-ldap postfix-pcre sasl2-bin dovecot-common postfix-cdb postfix-doc gsmartcontrol smart-notifier
Recommended packages:
  mailx mailutils
The following NEW packages will be installed:
  bsd-mailx postfix smartmontools
0 upgraded, 3 newly installed, 0 to remove and 0 not upgraded.
Need to get 2011 kB of archives.
After this operation, 5311 kB of additional disk space will be used.
Do you want to continue [Y/n]? y
Get:1 [url]http://archive.ubuntu.com/ubuntu/[/url] saucy/main postfix amd64 2.10.2-1 [1323 kB]
Get:2 [url]http://archive.ubuntu.com/ubuntu/[/url] saucy/main bsd-mailx amd64 8.1.2-0.20111106cvs-1ubuntu1 [66,3 kB]
Get:3 [url]http://archive.ubuntu.com/ubuntu/[/url] saucy/main smartmontools amd64 6.1+svn3812-1 [621 kB]
Fetched 2011 kB in 3s (644 kB/s)       
Preconfiguring packages ...
Selecting previously unselected package postfix.
(Reading database ... 168741 files and directories currently installed.)
Unpacking postfix (from .../postfix_2.10.2-1_amd64.deb) ...
Selecting previously unselected package bsd-mailx.
Unpacking bsd-mailx (from .../bsd-mailx_8.1.2-0.20111106cvs-1ubuntu1_amd64.deb) ...
Selecting previously unselected package smartmontools.
Unpacking smartmontools (from .../smartmontools_6.1+svn3812-1_amd64.deb) ...
Processing triggers for man-db ...
Processing triggers for ureadahead ...
Processing triggers for ufw ...
Setting up postfix (2.10.2-1) ...
Adding group `postfix' (GID 125) ...
Done.
Adding system user `postfix' (UID 116) ...
Adding new user `postfix' (UID 116) with group `postfix' ...
Not creating home directory `/var/spool/postfix'.
Creating /etc/postfix/dynamicmaps.cf
Adding tcp map entry to /etc/postfix/dynamicmaps.cf
Adding sqlite map entry to /etc/postfix/dynamicmaps.cf
Adding group `postdrop' (GID 126) ...
Done.
setting myhostname: ubuntu
setting alias maps
setting alias database
mailname is not a fully qualified domain name.  Not changing /etc/mailname.
setting destinations: ubuntu, localhost.localdomain, , localhost
setting relayhost:
setting mynetworks: 127.0.0.0/8 [::ffff:127.0.0.0]/104 [::1]/128
setting mailbox_size_limit: 0
setting recipient_delimiter: +
setting inet_interfaces: all
/etc/aliases does not exist, creating it.
WARNING: /etc/aliases exists, but does not have a root alias.

Postfix is now set up with a default configuration.  If you need to make
changes, edit
/etc/postfix/main.cf (and others) as needed.  To view Postfix configuration
values, see postconf(1).

After modifying main.cf, be sure to run '/etc/init.d/postfix reload'.

Running newaliases
 * Stopping Postfix Mail Transport Agent postfix                                                                          ​                                                   [ OK ]
 * Starting Postfix Mail Transport Agent postfix                                                                          ​                                                   [ OK ]
Setting up smartmontools (6.1+svn3812-1) ...
Processing triggers for ureadahead ...
Processing triggers for ufw ...
Setting up bsd-mailx (8.1.2-0.20111106cvs-1ubuntu1) ...
update-alternatives: using /usr/bin/bsd-mailx to provide /usr/bin/mailx (mailx) in auto mode
Processing triggers for libc-bin ...
ubuntu@ubuntu:~$ sudo smartct1 -a /dev/sda1
sudo: smartct1: command not found
ubuntu@ubuntu:~$ sudo smartctl -a /dev/sda1
smartctl 6.2 2013-04-20 r3812 [x86_64-linux-3.11.0-12-generic] (local build)
Copyright © 2002-13, Bruce Allen, Christian Franke, [url]http://www.smartmontools.org[/url]

=== START OF INFORMATION SECTION ===
Model Family:     Maxtor MaXLine III (SATA/300)
Device Model:     Maxtor 7V250F0
Serial Number:    V502S90G
LU WWN Device Id: 0 150500 7b47f4237
Firmware Version: VA111630
User Capacity:    251,000,193,024 bytes [251 GB]
Sector Size:      512 bytes logical/physical
Device is:        In smartctl database [for details use: -P show]
ATA Version is:   ATA/ATAPI-7 T13/1532D revision 0
Local Time is:    Thu May 15 12:12:14 2014 UTC
SMART support is: Available - device has SMART capability.
SMART support is: Enabled

=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED

General SMART Values:
Offline data collection status:  (0x80)    Offline data collection activity
                    was never started.
                    Auto Offline Data Collection: Enabled.
Self-test execution status:      (   0)    The previous self-test routine completed
                    without error or no self-test has ever
                    been run.
Total time to complete Offline
data collection:         ( 2102) seconds.
Offline data collection
capabilities:              (0x5b) SMART execute Offline immediate.
                    Auto Offline data collection on/off support.
                    Suspend Offline collection upon new
                    command.
                    Offline surface scan supported.
                    Self-test supported.
                    No Conveyance Self-test supported.
                    Selective Self-test supported.
SMART capabilities:            (0x0003)    Saves SMART data before entering
                    power-saving mode.
                    Supports SMART auto save timer.
Error logging capability:        (0x01)    Error logging supported.
                    General Purpose Logging supported.
Short self-test routine
recommended polling time:      (   2) minutes.
Extended self-test routine
recommended polling time:      ( 114) minutes.
SCT capabilities:            (0x0021)    SCT Status supported.
                    SCT Data Table supported.

SMART Attributes Data Structure revision number: 32
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME          FLAG     VALUE WORST THRESH TYPE      UPDATED  WHEN_FAILED RAW_VALUE
  3 Spin_Up_Time            0x0027   189   189   063    Pre-fail  Always       -       21367
  4 Start_Stop_Count        0x0032   252   252   000    Old_age   Always       -       2934
  5 Reallocated_Sector_Ct   0x0033   253   253   063    Pre-fail  Always       -       0
  7 Seek_Error_Rate         0x000a   253   252   000    Old_age   Always       -       0
  8 Seek_Time_Performance   0x0027   247   239   187    Pre-fail  Always       -       62622
  9 Power_On_Hours          0x0032   239   239   000    Old_age   Always       -       5031
 10 Spin_Retry_Count        0x002b   253   252   157    Pre-fail  Always       -       0
 11 Calibration_Retry_Count 0x002b   253   252   223    Pre-fail  Always       -       0
 12 Power_Cycle_Count       0x0032   246   246   000    Old_age   Always       -       2989
189 High_Fly_Writes         0x003a   100   100   000    Old_age   Always       -       0
190 Airflow_Temperature_Cel 0x0022   059   039   000    Old_age   Always       -       41 (Min/Max 23/41)
192 Power-Off_Retract_Count 0x0032   253   253   000    Old_age   Always       -       0
193 Load_Cycle_Count        0x0032   253   253   000    Old_age   Always       -       0
194 Temperature_Celsius     0x0032   044   253   000    Old_age   Always       -       41
195 Hardware_ECC_Recovered  0x000a   253   252   000    Old_age   Always       -       1301
196 Reallocated_Event_Count 0x0008   253   253   000    Old_age   Offline      -       0
197 Current_Pending_Sector  0x0008   253   253   000    Old_age   Offline      -       0
198 Offline_Uncorrectable   0x0008   253   253   000    Old_age   Offline      -       0
199 UDMA_CRC_Error_Count    0x0008   199   199   000    Old_age   Offline      -       0
200 Multi_Zone_Error_Rate   0x000a   253   252   000    Old_age   Always       -       0
201 Soft_Read_Error_Rate    0x000a   253   252   000    Old_age   Always       -       0
202 Data_Address_Mark_Errs  0x000a   253   252   000    Old_age   Always       -       0
203 Run_Out_Cancel          0x000b   253   252   180    Pre-fail  Always       -       0
204 Soft_ECC_Correction     0x000a   253   252   000    Old_age   Always       -       0
205 Thermal_Asperity_Rate   0x000a   253   252   000    Old_age   Always       -       0
207 Spin_High_Current       0x002a   253   252   000    Old_age   Always       -       0
208 Spin_Buzz               0x002a   253   252   000    Old_age   Always       -       0
210 Unknown_Attribute       0x0032   253   252   000    Old_age   Always       -       0
211 Unknown_Attribute       0x0032   253   252   000    Old_age   Always       -       0
212 Unknown_Attribute       0x0032   253   001   000    Old_age   Always       -       0

SMART Error Log Version: 1
ATA Error Count: 2643 (device log contains only the most recent five errors)
    CR = Command Register [HEX]
    FR = Features Register [HEX]
    SC = Sector Count Register [HEX]
    SN = Sector Number Register [HEX]
    CL = Cylinder Low Register [HEX]
    CH = Cylinder High Register [HEX]
    DH = Device/Head Register [HEX]
    DC = Device Command Register [HEX]
    ER = Error register [HEX]
    ST = Status register [HEX]
Powered_Up_Time is measured from power on, and printed as
DDd+hh:mm[img]http://www.istitutomajorana.it/forum/images/smilies/confused.gif[/img]S.sss where DD=days, hh=hours, mm=minutes,
SS=sec, and sss=millisec. It "wraps" after 49.710 days.

Error 2643 occurred at disk power-on lifetime: 4712 hours (196 days + 8 hours)
  When the command that caused the error occurred, the device was in an unknown state.

  After command completion occurred, registers were:
  ER ST SC SN CL CH DH
  -- -- -- -- -- -- --
  00 50 00 00 00 00 a0

  Commands leading to the command that caused the error were:
  CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  -- -- -- -- -- -- -- --  ----------------  --------------------
  ec 00 00 00 00 00 a0 00      00:01:27.532  IDENTIFY DEVICE
  c8 00 08 40 76 8a ec 00      00:01:27.472  READ DMA
  27 00 00 00 00 00 e0 00      00:01:27.449  READ NATIVE MAX ADDRESS EXT [OBS-ACS-3]
  ec 00 00 00 00 00 a0 00      00:01:27.441  IDENTIFY DEVICE
  ef 03 46 00 00 00 a0 00      00:01:27.435  SET FEATURES [Set transfer mode]

Error 2642 occurred at disk power-on lifetime: 4712 hours (196 days + 8 hours)
  When the command that caused the error occurred, the device was in an unknown state.

  After command completion occurred, registers were:
  ER ST SC SN CL CH DH
  -- -- -- -- -- -- --
  00 50 00 00 00 00 a0

  Commands leading to the command that caused the error were:
  CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  -- -- -- -- -- -- -- --  ----------------  --------------------
  ec 00 00 00 00 00 a0 00      00:01:25.541  IDENTIFY DEVICE
  c8 00 08 40 76 8a ec 00      00:01:25.479  READ DMA
  27 00 00 00 00 00 e0 00      00:01:25.457  READ NATIVE MAX ADDRESS EXT [OBS-ACS-3]
  ec 00 00 00 00 00 a0 00      00:01:25.449  IDENTIFY DEVICE
  ef 03 46 00 00 00 a0 00      00:01:25.442  SET FEATURES [Set transfer mode]

Error 2641 occurred at disk power-on lifetime: 4711 hours (196 days + 7 hours)
  When the command that caused the error occurred, the device was in an unknown state.

  After command completion occurred, registers were:
  ER ST SC SN CL CH DH
  -- -- -- -- -- -- --
  00 50 00 00 00 00 a0

  Commands leading to the command that caused the error were:
  CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  -- -- -- -- -- -- -- --  ----------------  --------------------
  ec 00 00 00 00 00 a0 00      00:20:21.100  IDENTIFY DEVICE
  c8 00 08 40 76 8a ec 00      00:20:21.040  READ DMA
  27 00 00 00 00 00 e0 00      00:20:21.018  READ NATIVE MAX ADDRESS EXT [OBS-ACS-3]
  ec 00 00 00 00 00 a0 00      00:20:21.010  IDENTIFY DEVICE
  ef 03 45 00 00 00 a0 00      00:20:21.003  SET FEATURES [Set transfer mode]

SMART Self-test log structure revision number 1
No self-tests have been logged.  [To run self-tests, use: smartctl -t]


SMART Selective self-test log data structure revision number 1
 SPAN  MIN_LBA  MAX_LBA  CURRENT_TEST_STATUS
    1        0        0  Not_testing
    2        0        0  Not_testing
    3        0        0  Not_testing
    4        0        0  Not_testing
    5        0        0  Not_testing
Selective self-test flags (0x0):
  After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.

ubuntu@ubuntu:~$
Cita messaggio
#57
Pare che non ci siano problemi con i settori del hdd. Ancora non mi hai risposto ad una domanda, sul tuo hdd ci sono due partizioni ext4, hai due distribuzioni installate??? Oppure???
 
Cita messaggio
#58
Qundo avvi il pc non ti compare un menu (grub) dove puoi scegliere di aviare -> "ubuntu versione......" -> "Memtest" -> "ubuntu ripristino" ??? Se no dai il seguente comando:


Codice:
sudo gedit /etc/default/grub

cerca la riga -> GRUB_HIDDEN_TIMEOUT=0  - falla diventare -> #GRUB_HIDDEN_TIMEOUT=0
 
Cita messaggio
#59
ti avevo inviato la risposta al  messaggio che mi avevi chiesto.Però, forse poi non lo spedito .

Comunque, ci sono due partzioni ext4, ma una distribuzione, quella di ubuntu 13.10.

adesso ti spedisco l'immagine dlla partizione così puoi vedere con più sicurezza.


Allegati Anteprime
   
Cita messaggio
#60
Ho capito; hai la configurazione con la home separata. Ora il sistema, da quello che ho capito, va bene???
 
Cita messaggio


Vai al forum:


Utenti che stanno guardando questa discussione: 1 Ospite(i)